The department historically and today is the largest scientific and educational center for welding in the Republic of Belarus, is engaged in the development and certification of welding processes of any level of complexity at the largest energy, construction and petrochemical facilities, has accredited experts and participates in the safety assessment of the Belarusian NPP in the areas related to welding, as a technical support body.
“Belarusian-Russian University” represented by the department is the leading specialized organization for welding and non-destructive testing at Belarusian NPP construction sites. A large amount of work is carried out to assess the quality of welded joints, perform incoming inspection of welding materials, and certify welding technologies, welders and welding supervisors. Department employees regularly take part in seminars on nuclear and radiation safety held under the auspices of the IAEA, and have also twice undergone advanced training in the field of nuclear and radiation safety of VVER reactor power plants under the programs of the European Institute ENSTTI, and are approved as independent experts on nuclear and radiation safety within the framework of the program for providing technical support to the Belarusian NPP. The technology for welding the main circulation pipeline with the steam generator, reactor vessel flange and main circulation pump has been certified. Welded joints belong to safety class I and are directly involved in the operation of the reactor and contact with the radioactive liquid coolant. As part of the safety assessment, conclusions were issued on the quality of welding and non-destructive testing work at the first and second power units of the Belarusian NPP. The department is the developer of Norms and Rules for ensuring nuclear and radiation safety.
Scientific work at the department is traditionally carried out in two main directions, corresponding to two welding methods: fusion welding and pressure welding. In addition, much attention is paid to the development of new materials for welding difficult-to-weld alloys, as well as digital control systems for the transfer of electrode metal. By developing fundamentally new approaches and mechanisms for the formation of a protective gas atmosphere, which make it possible to improve the technological characteristics of the process while arc welding modern steels (S700, S690QL, WELDOX, HARDOX) while reducing the cost of welding materials. A unique gas supply system has been developed that allows the components of the protective gas mixture to be supplied to the welding zone in independent flows. This creates the necessary conditions for optimal distribution of gas components in the arc combustion zone, which makes it possible to increase the stability of the welding process, reducing spattering of the electrode metal and the consumption of expensive gases. The results of scientific research have been introduced and found practical implementation in welding processes at JSC Seismotekhnika in the manufacture of elements of drilling rig systems for oil production.
Scientific work is underway to develop energy-efficient additive technologies for layer-by-layer 3D growth of metal structures using arc heating sources and metal filler materials, as well as promising systems for controlling the transfer of electrode metal in welding Al-Mg-Cu alloys of small thicknesses. Surfacing produced using the developed technology has the necessary set of mechanical characteristics and homogeneity of the chemical composition. The work receives practical application in the manufacture of special-purpose products and is introduced into production.
Specialists have extensive experience in developing technologies for the restoration of pipelines operating for a long time under non-standard temperature and deformation conditions, methods for controlling technological process parameters when welding difficult-to-weld materials and alloys with carbide and carbonitride hardening. The department has developed and implemented a number of unique, extremely important for the industry of Belarus, welding and repair technologies for increased service life of dissimilar steels, which are operated for a long time at temperatures of about 560°C. The developed technology was applied to process pipelines for transporting hydrogen-containing gases and repairing the fractionation column (viscosity breaking) at the Mozyr Oil Refinery OJSC.
Active research is underway to develop technologies for welding duplex austenitic-ferritic steels in the petrochemical industry.
The department has an accredited control and measurement laboratory that performs a colossal amount of testing in all areas of destructive testing. Some tests are also carried out according to the regulations of the Customs Union in the following areas:
The control and measuring laboratory is equipped with a set of equipment necessary for assessing the quality of welded joints, welding and surfacing materials, certification of welding processes and qualifications of welders, as well as carrying out research work to determine the performance of welded joints and analyze the causes of structural failure.
Tests are being carried out to determine resistance to intergranular corrosion. Some of the equipment was created directly at the department.
Thanks to the results achieved, the department is actively developing, participating in government programs, constantly improving its material and technical base, has high potential and a highly qualified, cohesive team of employees, which is an important and key condition for solving complex scientific and production problems.
The department actively cooperates with one of the world's largest and most significant manufacturers of quarry equipment BELAZ (Belarusian Automobile Plant). In the production of mining dump trucks, a promising direction is the use of ultra-high strength steels for elements of load-bearing frame and body structures, which are welded structures. In this case, an important issue is to ensure the performance of welded joints under severe operating conditions. They must have not only high strength indicators, but also the required level of ductility. The company is interested in such work, especially recently in connection with the expanding range of new materials. The complementarity of the work lies in the development of effective welding technologies, taking into account the import of materials for the production of metal structures and components.
In addition, today the Republic of Belarus does not have its own production of high-strength steels and most of the materials used are foreign-made (including materials produced in China are increasingly used) for the manufacture of booms of tower cranes (JSC Mogilevtransmash branch of MAZ) as well as heavily loaded elements of mining installations and processing of petroleum products, potash fertilizers in the field of petrochemistry (Belarusneft, Belaruskali).
The advantage of interaction with the department “Equipment and technology of welding production” is that the department is the lead organization for welding at hazardous significant production facilities and carries out the development and certification of all welding processes not only at these enterprises, but in general, in key areas development of energy, mechanical engineering and petrochemistry. The division is engaged in active practical contract work. This allows us to test the results obtained during scientific research in the real sector of the economy and introduce new technologies and materials.
In addition, of interest are studies related to metallurgical processes during welding and surfacing, issues of developing new filler materials, coatings, etc.